Problem - Bent or broken needles are costing you money!

Replacing the needles in your machines is a common practice, yet when done wrong you will have:

• reduced worker productivity
• damaged equipment
• unacceptable stitching
• machine down time

Solution - The Needle Injector!

The patent pending Needle Injector provides indexed needle alignment and a simple, quick method for installing needles in commercial, industrial and embroidery sewing machines.

Because the needle is indexed by the Needle Injector, the installation of needles is always quick and precise. This precision alignment prevents the hook assembly from coming into contact with the needle, eliminating damage to the needle or the hook assembly. By using the Needle Injector, you will improve the sewing operation of the machine and enhance the product appearance and quality.

Every machine operator will quickly come to rely upon this simple, safe and time-saving tool. After just a few uses, you too will be amazed at how much time you save by using the Needle Injector.

The Needle Injector takes just seconds to use:

1. Hold the Needle Injector with the black screw facing up.
2. Retract the red pin retainer until the needle can be slipped in the slot at the end of the Needle Injector.
3. Release the red pin retainer.
4. If the needle thread groove is not indexed, simply turn the needle until you feel the pin click into the thread groove.
5. Allow the point of the needle to be placed in the presser foot and feed the needle into the needle bar.
6. With the black handle of the Needle Injector facing straight out, tighten the needle set screw.

The Needle Injector will have your machines back in production FAST!